Showing all 25 results
Benchtop Filter Spout$8.80
This spout is a replacement most standard benchtop filters where the spout pushes into a tube fitting and is sealed off and rotates on the o-rings at the base. This will not work in taps that use threaded at the base type spouts.
Diverter Valve For Bench Top Filter, lever type$27.50
These diverter valves operate by turning the chrome lever to divert the flow from the sink outlet to your filter. Be mindful to always turn off the filter when finished as the next person to use the sink may unknowingly turn on the hot tap and potentially damage your filter. This diverter screws onto most […]
Diverter Valve for Bench Top filter, pull pin type$27.50
These diverter valves operate by firstly tuning on your cold water tap and then whilst the water is running, then pulling on the knob to divert the flow from sink outlet to your filter. To stop the flow of filtered water you simply turn off the cold tap at your sink and the spring loaded […]
John Guest “T” with Isolation Valve for easy undersink filter connections$44.00
This “T” makes for an easy connection when installing filter or cooler systems by simply bolting in between your bench top mixer taps braided cold line 1/2″ end nut and the mains connection fitting. It also has an isolation valve for use when servicing filters. Make in the UK by John Guest
John Guest Straight fitting with 1/4″ BSP thread$4.40
Choose your tube size from the sales drop down list. Made in the UK by John Guest
John Guest Straight fitting with 1/4″NPT thread$4.40–$6.60
Choose your tube size from the sales drop down list. This is the common thread used in most filter housing made in or for the American market. Made in the UK by John Guest
John Guest Tube- Imperial Sizes, SOLD PER METER$2.20–$2.75
Choose tube size off the sales drop list. This tube is food grade for potable water. Max rating 230 psi at 70 degrees Fahrenheit – 120 psi at 150 degrees Fahrenheit Made in the UK by John Guest
Mini Ball Valve- 1/2″ BSP Male and Female Threads$17.60
The small control lever on this valve suits locations where lever swing space is limited.
Pressure Limiting Valve 350KPA, Inline using 1/4″or 3/8″ tube$37.40–$44.00
Choose your line size from the sales drop down list. Made in NZ by Apex
Pressure Relief Valve Kit- For Housing and Tube Protection$60.50
This pressure relief valve ‘T”s off your 1/4″ supply tube into a dry section of the waste water drain pipe using the clamp and fitting supplied. If the water pressure exceeds 110 PSI (housings are certified to 125 PSI) the valve releases water to the drain. This helps protect against water hammer and also thermionic […]
Spanner Round, for our USA under sink housings$8.80
Spanner Round, for our USA under sink housings
Spout – Replacement for STD trigger tap with twin oring base.$8.80
This spout is a replacement most standard spring loaded black trigger type taps with the twin o-ring seals at the base. This will not work in taps that use threaded at the base type spouts.
Twin Bracket, Stainless Steel with Universal Fit Slotted Holes$19.80
This bracket suits our standard USA made 9″ and 10″ housings using #67100S screws which must be ordered separately, plus also most other housings.
Faucet Rebuild Kit$11.00
This kit comes with a special tool for removing the main plug and fits most standard bench top spring loaded taps with the black plastic trigger. Do keep in mind though that generally when a tap of around 10 years old does start to fail that often there is corrosion inside the body due to […]
Housing USA, Standard 9″ and 10″ filters, 1/4″ NPT inlet and outlet$44.00
These is our recommended 1/4″ NPT standard 9″ and 10″ housings as sold in our filter kits. Singly they use our #49000 Stainless steel bracket and #67100 screws which must be ordered separately.