Showing all 14 results
Benchtop Filter Housing Inlet Fitting$8.25
This is the standard inlet fitting for our benchtop housings with a 1/4″ NPT thread and nipple with locking nut for the soft 1/4″ tube.
Benchtop Filter Outlet Fitting with Spout Port$8.25
This is the standard outlet fitting for our benchtop housings with a 1/4″ NPT thread and vertical tube for inserting the spout.
Brass “T” – 1/2″ Copper pipe to 1/2″ BSP female Thread$18.70
This “T” has two compression fittings for connecting into a standard 1/2″ copper pipe.
Diverter Valve Male to Female Thread Adapter$8.25
Most diverter valves screw onto most standard taps which have a male thread available after removing the aerator. If you have a female thread, this adapter will be required. They come with a range of different thickness washers which you pack inside the longer threaded end so as to just sit proud of the end […]
Diverter Valve multi-fit clamp on adapter$8.80
This fitting allows the installation of our standard benchtop filter diverter valves in situations where a non standard attaching thread or tap spout end exists. Do be mindful that if using a ceramic filter cartridge, these items will struggle to stay attached on some spouts due to the high pressure build up whilst pushing water […]
Pressure Limiting Valve, Metal with BSP 1/2″inlet and 1/4″ outlet$66.00
Choose the pressure rating from the sales drop down list. Most filter systems, ice maker fridges and water coolers require a 350 KPA unit, whilst Reverse Osmosis systems use a 650. All Apex Pressure limiting valves incorporate a non-return valve. The inlet is 1/2″ BSP with a 1/4″ outlet.
Reducing Bush- 1’2″ to 1/4″ Chrome Metal$6.60
Reducing Bush- 1’2″ to 1/4″ Chrome Metal. Use for connecting supply water to the back of RM30 coolers or any other suited application.
Screw- Self tapper Stainless Steel, screws into 4mm hole$0.33
Choose the thread length from the sales drop down list. These screws will correctly screw into our USA made housings and others with a 4mm hole in the plastic. The shorter (67100S) with 12mm of thread will suit when using stainless steel mounting brackets and the longer (67100) having 18mm of thread will suit when […]
Waste line clamp-For RO waste or Relief valve$12.10
This waste line clamps around and seals off to most dry sections of your undersink waste pipe for attachment of either a Reverse Osmosis waste line or one of our pressure relief valve, chiller or filter, protection units.
1/4″ Joining Nipple 1/4″$6.60
This is a chrome brass 1/4″ joining nipple for housings. The extra length in the threads makes for a much more positive connection.
Laundry Adapter – 3 way$16.50
This adapter is for connecting between your laundry or any other 3/4″ cold tap and the appliance supply hose end. It has a 1/4″ female thread on the side for connection to a filter kit by either a 1/4″ male threaded straight connector or John Guest isolation valve as both shown in the plastic fittings […]
1″ Brass Joining Nipple$11.00
Use for interconnecting filter housings
1″ BSP to 1/2″ copper$23.00
This reducing bush and compression end fitting will connect your larger filter housings directly into standard 1’2″ copper line.
Stainless steel pressure gauge 1/4″ BSP$27.50
Suits all standard household pressures and can be useful in some situations for registering pressure drops across filters for the determination of cleaning or change times